Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. MDS-JS333ES
  5. User Manual

Sony MDS-JS333ES User Manual

Download
Page of 112
14
GB
Recording to an MD
Recording to 
MDs
This chapter explains the various ways 
to record to an MD, as well as how to 
mark track numbers and perform 
synchro-recording with other 
components. See also “System 
limitations” on page 47 before 
recording.
Recording to an MD
If the MD has been partially recorded, recording starts 
after the recorded tracks.
1
Turn on the amplifier and program source, and 
select the source on the amplifier.
2
Press 
?/1
 to turn on the deck.
The STANDBY indicator turns off.
3
Press OPEN/CLOSE
A
 to open the disc tray and 
insert a recordable MD.
To close the disc tray, press OPEN/CLOSE
A again.
4
Set INPUT to the position that corresponds to the 
input jacks (connector) connected to the program 
source.
5
If necessary, locate the point on the MD to start 
recording from.
If you want to record to a new MD or start recording 
from the end of the recorded portion, skip this step and 
go to step 6.
To record over from the beginning of an existing 
MD track
Turn AMS (or press 
./> repeatedly) until the 
number of the track to be recorded over appears.
To record over from the middle of an MD track
Turn AMS (or press 
./> repeatedly) until the 
number of the track to be recorded over appears, then 
press 
N to start play. Press X at the point you want to 
start recording from.
6
Press 
z
.
The deck changes to recording pause.
7
If necessary, adjust the recording level.
When the source is connected to 
the
Set INPUT to
DIGITAL IN OPT1 connector
OPT1 
DIGITAL IN OPT2 connector
OPT2
DIGITAL IN COAXIAL jack
COAX
ANALOG IN jacks
ANALOG
AMS
INPUT
N
OPEN/CLOSE A
X
z
?/1