Nilfisk Alto C.A.V. 15 User Manual

 American Sanders 

CAUTION!
On delivery, the accessories - are lying in the tank and
must be removed before the machine is used for the first
time. See figure 2.

To assemble the machine, remove the machine top
section:
The power cord must not yet be inserted into a plug
socket.

1. Open the retaining clamps and lift off the machine top

section (Figure 3).

2. Place a bag-type filter into the tank as described in the

instructions printed on the filter.

3. Fit the machine top section back on the tank, and close

the retaining clamps.

4. Connect the suction hose.  The "Wap Multifit" enables

any Wap Technology suction hoses (27, 32, 36, 50 mm
diameter) to be connected to the machine (Figure 4).

 MACHINE OPERATION

Picking Up Dry Substances
Before picking up dry substances, the bag-type filter

should always be installed in the tank.  It is then easy to

dispose of the material picked up and the service life of

the main filter element is significantly increased.  Dry

cleaning without bag-type filter is also possible.

After picking up liquids, the filter element is damp.  Damp

filter elements can clog more quickly when dry substances

are picked up.  For this reason, the filter element should

be dried or replaced before picking up any dry sub-

stances.

Before picking up liquids, the bag-type filter must always

be removed from the tank.

If foaming is observed, stop work immediately and empty

the tank.

Turn the switch to position "I" (Figure 3).