Nilfisk Alto ATTIX 791-2M/B1 User Manual
4
ATTIX 791-2M/B1
Use the socket on the vacuum
cleaner for the purpose defined
in the operating instructions
only.
cleaner for the purpose defined
in the operating instructions
only.
Before plugging an appliance
into the appliance socket:
1. Switch off the vacuum clean-
into the appliance socket:
1. Switch off the vacuum clean-
er
2. Switch off the appliance to
be connected.
CAUTION!
Follow the operating instructions
and safety instructions for appli-
ances connected to the power
tool socket.
Follow the operating instructions
and safety instructions for appli-
ances connected to the power
tool socket.
Tool socket
Maintenance, cleaning and
repair
repair
Only carry out maintenance
work described in the operating
instructions.
work described in the operating
instructions.
Always pull out the mains plug
before cleaning and mainte-
nance of the vacuum cleaner.
before cleaning and mainte-
nance of the vacuum cleaner.
During maintenance and clean-
ing, handle the vacuum cleaner
in such a manner that there is no
danger for maintenance staff or
other persons.
ing, handle the vacuum cleaner
in such a manner that there is no
danger for maintenance staff or
other persons.
In the maintenance area
– use filtered compulsory ven-
– use filtered compulsory ven-
tilation
– wear protective clothing
– clean the maintenance are
– clean the maintenance are
so that no harmful substanc-
es get into the surroundings.
es get into the surroundings.
Before removing the vacuum
cleaner from the area contami-
nated with harmful substances:
cleaner from the area contami-
nated with harmful substances:
– clean the outside of the vac-
uum cleaner, wipe it clean or
pack the vacuum cleaner in
well sealed packaging
pack the vacuum cleaner in
well sealed packaging
– and avoid spreading depos-
ited harmful dust.
During maintenance and repair
work all contaminated parts that
could not be cleaned satisfacto-
rily must be:
– packed in well sealed bags
– disposed of in a manner that
work all contaminated parts that
could not be cleaned satisfacto-
rily must be:
– packed in well sealed bags
– disposed of in a manner that
complies with valid regula-
tions for such waste remov-
al.
tions for such waste remov-
al.
A dust test must be performed at
least once every year by Nilfisk-
Alto service or a trained person.
This test includes, for example,
whether there is damage to
the filter, the vacuum cleaner is
sealed to the air and the control
equipment works properly.
least once every year by Nilfisk-
Alto service or a trained person.
This test includes, for example,
whether there is damage to
the filter, the vacuum cleaner is
sealed to the air and the control
equipment works properly.
Accessories and spare parts
Use only the brushes supplied
with the vacuum cleaner or
specified in the operating manu-
al. The use of other brushes can
adversely affect safety.
with the vacuum cleaner or
specified in the operating manu-
al. The use of other brushes can
adversely affect safety.
Use only original Nilfisk-Alto
accessories and spare parts
(see section 9.5). The use of
other parts can adversely affect
safety.
accessories and spare parts
(see section 9.5). The use of
other parts can adversely affect
safety.
Never spray water on to the
upper section of the vacuum
cleaner. Danger for persons,
upper section of the vacuum
cleaner. Danger for persons,
risk or short-circuiting.
Observe the latest edition of the
IEC regulations.
IEC regulations.