Nilfisk Alto 114RS SWEEPER User Manual
American-Lincoln Technology
1-11
114 RS Operator’s Manual
KEY SWITCH - See Figure 2
The Key Switch turned to the right, the “ON” position, will provide power to all Sweeper systems.
The Key Switch turned to the right, the “ON” position, will provide power to all Sweeper systems.
HORN BUTTON - See Figure 2
The horn button is active only when the key switch is “on”. Push the horn button to sound the horn.
The horn button is active only when the key switch is “on”. Push the horn button to sound the horn.
HOUR METER - See Figure 2
The hour meter is activated when the key switch is in the “On” position. The meter indicates the time, in Hours
that the machine has been operated. This is useful for determining service intervals.
The hour meter is activated when the key switch is in the “On” position. The meter indicates the time, in Hours
that the machine has been operated. This is useful for determining service intervals.
LIGHT SWITCH - See Figure 2
The Light Switch is a push-pull type switch that turns on the Front and Rear Lights. Pull the switch “out” to turn
on the Lights. Push the switch “in” to turn off the Lights. The Lights are not controlled by the key switch and
can be turned on regardless of the key switch position.
The Light Switch is a push-pull type switch that turns on the Front and Rear Lights. Pull the switch “out” to turn
on the Lights. Push the switch “in” to turn off the Lights. The Lights are not controlled by the key switch and
can be turned on regardless of the key switch position.
SEAT ADJUSTMENT
This lever is located on the right of the seat. This lever allows the seat to be adjusted forward or back when
the lever is moved.
This lever is located on the right of the seat. This lever allows the seat to be adjusted forward or back when
the lever is moved.
FILTER SHAKER SWITCH - See Figure 2
The filter shaker switch is a momentary on rocker type switch that when depressed and held shakes accumu-
lated debris from the dust control filter. Press and hold the switch for 15 seconds to clear the filter. The filter
should be cleared periodically while sweeping and prior to emptying the hopper.
The filter shaker switch is a momentary on rocker type switch that when depressed and held shakes accumu-
lated debris from the dust control filter. Press and hold the switch for 15 seconds to clear the filter. The filter
should be cleared periodically while sweeping and prior to emptying the hopper.
SIDE BROOMS LIFT LEVER - See Figure 2
The Side Brooms Lift Lever is a two-position control that allows for Lifting or Lowering of the Side Brooms.
Placing the lever to the left lowers the Side Brooms. Placing the lever to the right into the indent raises the
Brooms.
The Side Brooms Lift Lever is a two-position control that allows for Lifting or Lowering of the Side Brooms.
Placing the lever to the left lowers the Side Brooms. Placing the lever to the right into the indent raises the
Brooms.
HORN
FILTER
SHAKER
DUST CONTROL
BATTERY
CONDITIO
CONDITIO
N
CHEC
K WH
ILE O
PERA
TING
OFF
OFF
OFF
ON
ON
ON
SIDE BROOMS
ON
DOWN
UP
SIDE
BROO
MS
VOLTAG
E LOW
BROOM
S ARE O
FF
RECHAR
GE BAT
TERIES
CB1 CB5
CB4 CB7
CB8
CB1 CB
5 CB4 C
B7 CB8
WHEE
L LOC
K
UNLO
CK
LOCK
WARNING
UNEXPEC
TED MOV
EMENT C
OULD RE
SULT IN
PERSON
AL INJUR
Y OR PRO
PERTY D
AMAGE.
TURN KEY
TO "OFF"
AND ENG
AGE WHE
EL LOCK
BEFORE
LEAVING
OPERATO
R'S SEAT
SIDE BROOMS LEVER
HOUR METER
LIGHT SWITCH
FILTER SHAKER SWITCH
HORN
LOW BATTERY LIGHT
WHEEL LOCK
BATTERY CONDITION METER
DUST CONTROL SWITCH
SIDE BROOMS SWITCH
KEY SWITCH
EMERGENCY STOP BUTTON
MAIN BROOM LEVER
C0461
FIGURE 2
MACHINE CONTROLS