Nilfisk Alto 12 GALLON RDF User Manual

ATTIX 550-01/550-11 MOBIL/550-21/590-21
ATTIX 12 GALLON / ATTIX 12 GALLON RDF
ATTIX EC 12 GALLON AS/E

22

1) 

Option depending on model

Check it for damage and 
replace if necessary.

5.  Check antistatic clamp (5) 

for damage and have it 
replaced by Alto Service if 
necessary.

6. Check the fl oater (6) for 

proper operation:  When 
you turn the fi lter holder, the 
fl oater should move back 
and forth easily.

7.  Fit a new fi lter element.
8. Fit the fi lter holder and turn it 

clockwise to secure it.

9.  Dispose of the used fi lter 

element in accordance with 
legal regulations.

‡   

Motor does not start

>  Fuse in mains plug has 

blown.

>  Overload protection switch 

has tripped.

>  Self-acting carbon brush is 

worn 

1)

•  Reset the fuse.

•  Switch off the vacuum clea-

ner and allow it to cool for 
approx. 5 minutes. If it can 
not be started again, contact 
the Alto service department.

•  Have carbon brushes 

changed by Alto Service.

‡  Motor does not run in auto-

matic mode

1)

>  Power tool is defective or 

not connected properly.

>  The power rating of the elec-

trical tool is too low.

•  Check that the power tool 

works or that the plug is 
inserted correctly.

•  Note that minimum power 

rating is P>40W