Nilfisk Alto 530 User Manual

Hardware Package:  The package contains two nuts
and bolts, one screw and one spring.

1. Assemble Lower Handle

Attach lower handle over socket, align holes and
fasten with bolt and internally threaded nut provided
in hardware package.

2. Attach Upper Handle

Place upper handle over lower handle align holes
and fasten with bolt and internally threaded nut
included in hardware package.

3. Install Line Cord Support and Bag Hook

Attach spring bag hook to rear upper handle tube.
Insert fitting end into rectangular hole.  Align holes
and fasten with screw provided in hardware pack-
age.

4. Bag Assembly (OPTIONAL ACCESSORY)

Open zipper of paper bag cover.  Attach spring
around dust bag connector located inside paper bag
cover (see figure 4).  Slide paper bag tube over
connector and roll spring up to hold bag.  Be sure
zipper printing on paper aligns up with zipper on
paper bag cover.  Hold paper bag cover on back of
the unit with printing facing handle tube.

5. Install Bag to Upright Vacuum

Slide lower bag support into slots of bag support
guide, pressing right.  Push bag support towards
inlet and turn knob clockwise.  Insert top spring into
hook (see figure 5).

Top Spring

Paper Bag
Cover

Paper Bag
Tube

Spring

Lower Bag Support

Dust Bag
Connector

Line Cord
Support
and Bag
Hook

Bag
Support
Guide

Knob