Nilfisk Alto 30 M User Manual

14

ATTIX 30/50 H/M

english

*) 

Optional accessories / Option depending on model

The suction 
power control 
switch allows 
precise 
adaptation of 
the suction 
power for 
different 
cleaning tasks.

The vacuum cleaner is switched 
on and off by the power tool con-
nected. Dirt is picked up from the 
source of dust immediately.

To comply with regulations, only 
approved dust producing tools 
should be connected.

The maximum power consumption 
of the connected electrical appli-
ance is stated in section "Technical 
data".

Before switching the switch to po-
sition „auto“, ensure that the tool 
connected to the appliance socket 
is switched off.

1.  Switch off the vacuum clean-

er.

2.  Switch  off  the  power  tool. 

 
 
 
 
 
 
 
 
 

3.  Connect  the  power  tool  and 

the  vacuum  cleaner  with  a 
suction hose.

4.  Insert  the  plug  of  the  pow-

er  tool  into  the  tool  socket 
on  the  operating  panel 
of  the  vacuum  cleaner. 
 
 
 
 
 

5.  Switch on the vacuum clean-

er. Switch in "auto" position.

6.  Switch on the power tool. The 

vacuum cleaner motor starts 
when  the  connected  power 
tool is switched on.
When  the  power  tool  is 
switched  off,  the  vacuum 
cleaner  continues  to  run  for 
a  short  moment  so  that  any 
dust  in  the  suction  hose  is 
conveyed to the filter bag.

auto

auto