Nilfisk Alto 2000 User Manual

 AMERICAN-LINCOLN TECHNOLOGY

1 - 15

SMART 2000

LIGHT SWITCH (See Figure 2)
The light switch is located above the horn button to the left
of the steering wheel. By pressing on the lower part of the
switch, it will work various light options that are available for
this machine, such as:

Headlights
Taillights

HORN BUTTON (See Figure 3)
The horn button is located to the left of the steering column
below the instrument panel.  The horn button is always
active.

KEY SWITCH (See Figure 4)
The keyed ignition switch is located on the instrument panel
to the right of the broom lever.

The “OFF” position (O position) will shut off the engine. The
IGN/ON position (I position) provides power to all machine
systems and accessories.  The “START” position (one
position clockwise of I position) is momentary and provides
power to the starter motor.

HOUR METER (See Figure 5)
The hour meter is located on the instrument panel below the
fuel gauge (gas version), below the battery condition meter
(battery version). The meter is activated when the key
switch is placed in the ignition position.  The meter
indicates the actual “run” time of the machine.  The meter
can be used to determine when maintenance should be
done on the machine.

Figure 2

Figure 4

Figure 5

Figure 3