Nilfisk Alto 2000 User Manual
AMERICAN-LINCOLN TECHNOLOGY
1 - 19
SMART 2000
A
B
Figure 17
Figure 16
Figure 15
RECOVERY HIGH LIGHT (See Figure 15)
The recovery high warning light will illuminate
approximately 5 minutes before the recovery tank is full,
giving ample time to complete the scrubbing cycle, before
the mechanical float shuts off the vacuum to the recovery
tank.
The recovery high warning light will illuminate
approximately 5 minutes before the recovery tank is full,
giving ample time to complete the scrubbing cycle, before
the mechanical float shuts off the vacuum to the recovery
tank.
LOW SOLUTION LIGHT (See Figure 15)
The Low Solution Warning Light is located on the
console. The Solution Warning Light will illuminate when
the solution tank is empty, marking the end of the
scrubbing cycle.
The Low Solution Warning Light is located on the
console. The Solution Warning Light will illuminate when
the solution tank is empty, marking the end of the
scrubbing cycle.
PARKING BRAKE (See Figure 16)
Never leave operator’s seat without engaging the parking
brake. The parking brake is located on the floor of the
machine left of the directional control pedal. To set the
parking brake, press down on the foot pedal (Item A) and
the press down the lock (Item B). To unlock the parking
brake, push down on the upper portion of the foor pedal
and release.
Never leave operator’s seat without engaging the parking
brake. The parking brake is located on the floor of the
machine left of the directional control pedal. To set the
parking brake, press down on the foot pedal (Item A) and
the press down the lock (Item B). To unlock the parking
brake, push down on the upper portion of the foor pedal
and release.
TURN SIGNAL - 4-Way (Option)
The turn signal option is located on the steering column
and works as automotive turn signals work, forward on
the lever for right and back on the lever for left. The 4-way
flasher will activate when the turn signal lever is pulled
out.
The turn signal option is located on the steering column
and works as automotive turn signals work, forward on
the lever for right and back on the lever for left. The 4-way
flasher will activate when the turn signal lever is pulled
out.
HYDRAULIC RESERVOIR LEVEL SIGHT GAUGE (See
Figure 17)
The sight gauge is located on the left side of the machine
under the front cover. The sight gauge is used to indicate
the level of fluid in the reservoir. The fluid level must be
visible in the sight gauge when the hopper is in the down
position.
Figure 17)
The sight gauge is located on the left side of the machine
under the front cover. The sight gauge is used to indicate
the level of fluid in the reservoir. The fluid level must be
visible in the sight gauge when the hopper is in the down
position.
OPERATION OF CONTROLS AND GAUGES - Cont.