Panasonic MC-CG885 User Manual
14
D-1
D-2
D-3
D-4
D - MAINTENANCE AND SERVICING
WARNING
• Disconnect the electrical supply before cleaning or
maintaining the vacuum cleaner.
• To avoid injury, keep your fingers and hands away
from the beater bar.
Indicator for replacing the dust bag
Turn the power control to the highest setting and lift the nozzle
off the floor. If the dust indicator turns red, the dust bag is full and
requires replacing the dust bag.
off the floor. If the dust indicator turns red, the dust bag is full and
requires replacing the dust bag.
NOTE: If the dust bag is not properly installed, the dust cover will
not close. Be sure to check that the dust bag is properly
installed before operating the vacuum cleaner, otherwise
dust will leak out.
The dust bag can easily lay on the dust cover packing or
clip between the bag collar and the body, so be sure to
properly extend it into the body of the vacuum cleaner.
installed before operating the vacuum cleaner, otherwise
dust will leak out.
The dust bag can easily lay on the dust cover packing or
clip between the bag collar and the body, so be sure to
properly extend it into the body of the vacuum cleaner.
Replacing the dust bag
Before replacing the dust bag, turn off and unplug vacuum
cleaner, remove hose from canister.
D-1
cleaner, remove hose from canister.
D-1
Lift the hood release and raise the dust cover until it
clicks properly.
clicks properly.
D-2
Remove the basket and throw away the dust bag.
D-3
Set the basket first to the vacuum cleaner and set a new
dust bag back to the basket.
dust bag back to the basket.
D-4
Close the dust cover properly until you hear it click.
MC-CG880(V01Z5L00U)_0818.indd 14
MC-CG880(V01Z5L00U)_0818.indd 14
2008/08/19 18:41:52
2008/08/19 18:41:52