Panasonic MC-CL481K User Manual

• 

The plug must be removed from the socket outlet before cleaning or maintaining the appliance. 

• 

To avoid injury, keep your fingers and hands away from the beater bar. 

• 

DO NOT use hot air or hot surface to dry filter. Keep at room temperature for approximately 24 hours. 

• 

IMPORTANT : Before re-installing the washable filter, make sure they are completely dry to avoid damaging the cleaner.

IMPORTANT /       /
•  Empty the dust compartment when it is full or the suction power seems to be bad.

NOTE /          / 
•  When vacuuming fine dust, such as powder or similar, there may be a loss of suction power. If this happens, empty the dust compartment and check for possible  
  dust trapped on the filters.

D - 1  Push the dust compartment buckle and pull up the dust compartment from the main body.
D - 2  Rotate the slider for 5 times.
D - 3  Pull out the filter assembly from the dust compartment.
D - 4  Empty the dust compartment.
D - 5  Place back the filter assembly into the dust compartment.
 

 

Be sure to use the cleaner with the filter assembly at the dust compartment.

D - 6  Set the dust compartment into the main body. Return dust compartment buckle to an original position. (Press until it "clicks")

D - 7  Unlock the Pre-filter and pull it up as illustrated.
D - 8  Remove the dust accumulated in the filter unit by tapping it against a hard surface lightly.
 

 

Don't clean the filter unit by brush or clean it with water.

D - 9  Reinstall the filter unit as per reverse procedure.

6

•

•

•

.

•

.

 .

.

•

•

•

•

•

•

 :

.

.

.

 .

.

 :

.

•
•

.

•

•

 .

.

.

 .

.

D – 

.

D – 

.

D – 

.

D – 

.

D – 

.

:

.

D – 

 .

) .

"

 "

(

D – 

.

.

D  – 

D – 

.

D – 

D – 

.

:

.

D – 

 .

) .

"

 "

(

D – 

.

D – 

.

:

.

D – 

.

D – 

.

D – 

.

:

.

D – 

.