Panasonic MC-GG773 User Manual
- 36 -
- 13 -
Voltaje
Protector termal
Extensión de cordón
Herramientas
120 V c.a. (60 Hz)
Si
15.2 m (50 pi)
Si
Power
Thermal Protector
Cord Length
Tools
120V AC (60 Hz)
Yes
15.2 m (50 Ft.)
Yes
Alimentation
Protecteur thermique Longueur du cordon
Accessoires
120 V c.a. (60 Hz)
Oui
15.2 m (50 pi)
Oui
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
Cleaning Exterior and Tools
➢
➢ Clean exterior using a clean, soft cloth that has been dipped in a solution of mild
liquid detergent and water and wrung dry.
➢
➢ DO NOT drip water on vacuum cleaner
➢
➢ Wipe dry after cleaning.
➢
➢ DO NOT clean tools in dishwasher or clothes washer.
➢
➢ Wash tools in warm soapy water, rinse and air dry.
➢
➢ DO NOT use tools if they are wet.
Cleaning Agitator
➢
➢ Clean agitator after every five uses
and every time the belt is replaced.
➢
➢ Remove lower plate. See: “Removing
and Installing Lower Plate”
➢
➢ Cut off any hair, thread, string, carpet
pile, and lint entangled around
agitator with a pair of scissors.
agitator with a pair of scissors.
➢
➢ Remove agitator. See: “Replacing
Belt”
➢
➢ Remove any string or debris located
on the end caps, washers or agitator
shaft.
shaft.
➢
➢ Reinstall agitator and lower plate.
See: “Removing and Installing Lower
Plate”
Plate”