Windsor 10125070 User Manual

 WAVIF  86038520  05/15/07 

 
 
 

HOW IT OPERATES 

This machine is a portable, easy to use wide area 
vacuum designed for use indoors, in a commercial or 
light industrial environment. 
 
When operating as a carpet vacuum, soil is lifted 
from the carpet surface by a rotating brush and 
carried into a removable bag by the vacuum motors. 
 
1.  Large debris such as paper cups, plates, etc.,  

should be picked up before starting the cleaning 
process. 

 
2.  Plan your cleaning route to work away from the  

electrical source. Move machine forward at a 
steady pace. 

CLEANING 
 

1.  Adjust handle to comfortable position at waist  

level or higher. 

2.  Use your finger to depress the Vacuum switch at 

the base of the handle to activate the vacuum. 

3.  To adjust brush height, move the Brush  

Adjustment lever on the right side to the correct  
setting for the carpet being vacuumed. Lower  
brush gradually until firm brush contact is heard. 

 
KEEP MACHINE MOVING WHILE BRUSH ENGAGED. 
DAMAGE TO CARPET COULD OCCUR IF NOT 
MOVING. 
 

NOTE: Always return brush to storage position after 
using machine. 
4.  Depress the brush lever at the handle to start the
       brush. 
5.  Move forward at a steady pace for through  

cleaning. Run machine more slowly over  
extremely soiled areas. 

6.  Use the right side of the machine for edge  

cleaning. 

7.  To use the accessory wand and detail tools,  

depress the foot lever in the back of the machine.

8.  To keep the vacuum operating at maximum  

efficiency, check the dust bag regularly. Empty  
when 1/2 to 3/4 full. Always use with disposable  
paper bag for best results. 

9.  When finished vacuuming, coil the cable by hand 

by looping into  about a 3 foot diameter, Hang  
coiled cable over handle. Wrap the end around  
the cable loop to secure. 

10.    Return brush to storage position.