Fortec FS-4000v2 User Manual

4. Motor Setting: Press OK  key to the Motor 

Setting window.

Satellite:  Press              keys to select the 

satellite in circle. Or press OK key to pop up 

the drop-down list, then select  the desired 

satellite in the list and press OK key to 

confirm.

Transponder: The same operation as the 

above.

Position No., & Save: The range is from 0 to 63.  "0" delegates the original position. 

You can select the proper value when you has rotated the  antenna.

Go to X: Press OK key to pop up the drop-down list, select the proper position 

(reference or from 1to 63) to realize the selected position.

West <Save> East: Press          key to turn west, while press         key to turn east. 

Press  OK key to pop up the dialogue "Are you sure to change this satellite's 

position?". Press OK key at the Yes button to save the current position, or press OK 

key at the No button to cancel the operation.

Recalculation: Press OK  key to pop up the dialogue "Are you sure to change this 

satellite's position?". Press OK key at the Yes button to recalculation.

5. Limit Setup: Press OK key to pop up the 

Limit Setup window.

Limit Setup: Press           keys to switch 

among Disable Limit, East Limit and West 

Limit.

Limit Setup: Move cursor to the Limit Setup 

button. You can press         key to turn west , 

or press       key to turn east.

Go to Reference: Press OK key to go to 

reference. If you select Disable Limit in the 

above Limit Setup item, this button will turn 

grey.