Sennheiser EW 300 IEM G3 User Manual
Specifications
25
Specifications
In compliance with
RF characteristics
Frequency ranges
516–558, 566–608, 626–668, 734–776,
780–822, 823–865 MHz (A to E, G, see page 4)
780–822, 823–865 MHz (A to E, G, see page 4)
Transmission frequencies
1,680 frequencies,
tuneable in steps of 25 kHz
tuneable in steps of 25 kHz
Switching bandwidth
20 frequency banks, each with up to 16 factory-preset
channels
channels
Frequency stability
6 frequency banks with up to 16 user programmable
channels
channels
Antenna output
42 MHz
RF output power at 50
Ω
±10 ppm (–10°C to +55°C)
Frequency ranges
BNC socket, 50
Ω
Transmission frequencies
typ. 10/30 mW
(Low/Standard),
switchable
(Low/Standard),
switchable
AF characteristics
Modulation
wideband FM stereo (MPX pilot tone)
Compander system
Sennheiser
HDX
Nominal/peak deviation
±24 kHz/±48 kHz
MPX pilot tone (frequency/deviation)
19 kHz/±5 kHz
AF frequency response
25 Hz to 15 kHz
AF input
BAL AF IN L (I)/BAL AF IN R (II)
2 x XLR-3/¼” (6.3 mm) jack combo socket,
electronically balanced
electronically balanced
Max. input level
+22 dBu
THD
(at 1 kHz and nominal deviation)
< 0.9%
Signal-to-noise ratio
at nominal load and peak deviation
at nominal load and peak deviation
> 90 dB
AF output
LOOP OUT BAL L (I)/LOOP OUT BAL R (II)
¼” (6.3 mm) stereo jack socket, balanced
Overall device
Temperature range
–10°C to
+55°C
Power supply
12 V
Current consumption
max. 350 mA
Dimensions
approx. 202 mm x 212 mm x 43 mm
Weight
approx. 980 g
Europe
EMC
EN 301489-1/-9
Radio
EN 300422-1/-2
Safety
EN 60065