Sennheiser SK 100 User Manual
24
Adjusting settings via the operating menu
왘
Set the desired channel.
왘
Set the desired frequency.
Setting the mode for the MUTE switch – “Mute Mode”
For information on how to use the
MUTE
switch, refer to
Emulating guitar cables – “Cable Emulation”
Via the “
Cable Emulation
” menu item, you can emulate
4 different guitar cable capacities.
Activating/deactivating the pilot tone transmission –
“Pilot Tone”
“Pilot Tone”
왘
Press the
SET
button.
The frequency selection appears.
왘
Press the
SET
button.
Your settings are stored.
You are back to the operating menu.
You are back to the operating menu.
Mode
Function
“
AF
On/Off
”
When the switch is in the
MUTE
posi-
tion, no audio signal is transmitted.
“
RF On/Off
”
When the switch is in the
MUTE
posi-
tion, the RF signal is deactivated.
“
Disabled
”
The muting function is deactivated.
SET
SET
SET
543.200 MHz
Tune
B.Ch: U.
1
B.Ch: U.
1
Tune
Call up “Tune”
(special function)
(special function)
Advanced Menu
Tune
“Stored”
543.200 MHz
Select the channel;
store the setting
store the setting
Set the
frequency
frequency
543
.200 MHz
Advanced
Menu
Mute Mode
Mute Mode
Mute Mode
RF On/Off
AF On/Off
AF On/Off
“Stored”
Call up
“Mute Mode”
“Mute Mode”
Select the desired
setting
setting
Store the setting
SET
SET
Cable Emulation
Advanced Menu
Cable Emulation
Medium
Medium
Cable Emulation
High
“Stored”
Select the desired
setting
setting
Store the setting
Call up “Cable
Emulation”
Emulation”
SET
SET
Name
Advanced Menu
Pilot Tone
Active
Active
Pilot Tone
Inactive
Pilot Tone
“Stored”
Call up
“Pilot Tone”
“Pilot Tone”
Select the desired
setting
setting
Store the setting
SET
SET