Sony 3-873-945-12 (1) User Manual

26

Using the wireless remote control function

Turn off the power, and then while 
holding down the SET button, turn the 
power on.

The signal transmission stops.

Press the + or – button repeatedly until 
the GP/CH indication is displayed.

Hold down the SET button until the 
item to be set flashes.

Press the + or – button repeatedly to 
select a group.

Press the SET button to enter the 
group.

The channel indication starts flashing.

Press the + or – button repeatedly to 
select a channel.

Press the SET button to enter the 
channel.

When the transmitter is paired with the 
receiver, the transmission channel of the 
transmitter is set to the receiving channel on 
the receiver automatically.

This transmitter is equipped with a wireless 
remote control function that can be used to 
set the parameters (low-cut filter, 
attenuation operation, power save mode, 
etc.) of the transmitter through the receiver 
or other devices. This function makes it 
easier to operate and manage the 
microphone system while in the field.
This wireless control is 2.4 GHz 
IEEE802.15.4 compliant and has no effect 
on the RF band of digital wireless audio.
This function is activated when pairing is 
established between the transmitter and the 
receiver using the RF REMOTE function. 
Pairing must be done first before the 
wireless remote control function can be 
used.

Pairing links the transmitter with the 
receiver which the wireless remote control 
function is to be used.
When the transmitter has been paired with a 
receiver through the receiver operation, 
turning on the transmitter while holding 
down the – button establishes the pairing 
immediately.

To carry out pairing through menu 
operations on the transmitter, do the 
following.

Set the receiver to be used for 
controlling the transmitter to pairing 
mode.