A.O. Smith SGE User Manual

Instruction manual SGE

63

gis

This chapter describes:
•

•

;

•

.

To shut the appliance down for a brief period, you must 
activate the frost protection.
You can use the frost protection to prevent water 
freezing in the appliance.
Activate the frost protection as follows:
1. Press the  

 button to select the main menu.

2. Use   and   to position the cursor in front of OFF.

Confirm with 

.

The frost protection cuts in if the water temperature 
drops below 5°C. The text FROST will then appear on 
line one of the display. The appliance heats the water 
to 20°C (T

set

) and drops back to the OFF mode.

Note
These values of 5°C and 20°C cannot be adjusted.

The appliance should only be isolated from mains 
power in the correct way. The correct procedure is as 
follows:
1. Activate the MENU with 

.

2. Position the cursor in front of OFF.
3. Confirm OFF with 

.

4. Wait until the fan has stopped. The   symbol is 

then dimmed.

5. Switch the appliance OFF (position 0) using the 

ON/OFF switch on the control panel.

6. Isolate the appliance from the power supply by 

setting the isolator between the appliance and the 
mains power supply to position 0.

Drain the appliance if you are shutting it down for a 
long period. Proceed as follows:
1. Isolate the appliance from the power 

supply

.

2. Shut off the gas supply.
3. Close the stop valve in the hot water pipe.
4. Open the drain valve
5. Bleed the appliance (or installation) so that it 

drains completely. 

OFF

13:45 Thursday

6ÉC

FROST PROTECTION

ACTIVATED

MENU

 »OFF

^ ON

È WEEK PROGRAM