Vulcan-Hart GCT24 User Manual

 

- 3 - 

 
Vulcan hot plates are produced with quality workmanship and material. These hot plates are designed 
with efficiency in cooking performance, sanitation, and ease of cleaning in mind. Proper installation, 
usage and maintenance of your hot plate will result in many years of satisfactory performance. 
 
The manufacturer suggests that you thoroughly read this entire manual and carefully follow all of the 
instructions provided. 
 

 

Flex Hose and Quick 
Disconnect 

 

- ¾” (18.75 mm) flex hose / disconnect, 4’ (1219 mm long). 
- 1" (25 mm) flex hose / disconnect, 4' (1219 mm) long. 

 
UNPACKING 
 
This hot plate was inspected before leaving the factory. The transportation company assumes full 
responsibility for safe delivery upon acceptance of the shipment. Immediately after unpacking, check for 
possible shipping damage. If the hot plate is found to be damaged, save the packaging material and 
contact the carrier within 15 days of delivery. 
 
If burner has been shipped using any package strapping devices, remove these before installing the hot 
plate. 
 
Before installing, check the type of gas supply (natural or propane) to make sure they agree with the 
specifications on the rating plate located on the side of the hot plate. If the supply and equipment 
requirements do not agree, do not proceed with the installation. Contact your dealer immediately. 
 
LOCATION 
 
The equipment area must be kept free and clear of combustible substances. 
 
Installation 

clearances:   COMBUSTIBLE 

 NON-COMBUSTIBLE 

CONSTRUCTION 

 

CONSTRUCTION 

Back:    

  6" (152 mm)   

 

 

0" 

Right Side:  

10" (254 mm)   

 

 

0" 

Left Side:  

10" (254 mm)   

 

 

0" 

 
The installation location must allow adequate clearances for servicing and proper operation. A minimum 
front clearance of 24" (610 mm) is required.