GE GP94ENSRSA User Manual
Installation Instructions
ELECTRICAL CONNECTION
INFORMATION
INFORMATION
WARNING –
To reduce the risk
of fire, electrical shock and personal injury:
The water heater must be electrically grounded
in accordance with local codes and ordinances
or, in the absence of local codes, in accordance
with the NATIONAL ELECTRICAL CODE, ANSI/NFPA
NO. 70, or the CANADIAN ELECTRICAL CODE,
CSA C22.1.
in accordance with local codes and ordinances
or, in the absence of local codes, in accordance
with the NATIONAL ELECTRICAL CODE, ANSI/NFPA
NO. 70, or the CANADIAN ELECTRICAL CODE,
CSA C22.1.
ELECTRICAL REQUIREMENTS
This appliance must be supplied with 120V, 60Hz,
and connected to a properly grounded branch
circuit, protected by a 15- or 20-amp circuit
breaker or time-delay fuse.
and connected to a properly grounded branch
circuit, protected by a 15- or 20-amp circuit
breaker or time-delay fuse.
If electrical supply provided does not meet the
above specifications, it is recommended that a
licensed electrician install an approved outlet.
above specifications, it is recommended that a
licensed electrician install an approved outlet.
4
PCB
GROUND
TERMINAL
120VAC CONNECTION WIRES
(Black-Hot/White-Neutral)
Wire nuts
Inside unit
Electrical
disconnect
switch
disconnect
switch
Electrical
connection
connection
Outside unit
16