Honeywell CT3650 User Manual
15
69-1285—2
Program the First Day
Start by programming the wake time and temperature for one day.
❑
Press and release
.
❑
Press
until the desired day displays. (Mon, Tue, Wed, Thu, Fri, Sat, Sun)
❑
Press time
or
until the desired time shows in the display.
NOTE:
Program times are in 15 minute intervals. For example, 8:00, 8:15, 8:30.
❑
Press
or
until the desired wake temperature displays.
The setpoint temperature range is 40°F to 90°F (4.5°C to 32°C) for heating and 45°F to 99°F (7°C to 37°C) for cooling.
❑
Press
to switch between setpoints.
NOTE:
Program times are the same for heating and cooling.
❑
Press
or
until the display shows the desired temperature setpoint.
NOTE:
You can program the fan to On or Auto for each program period. Setting Fan to On runs the system fan
continuously in the program periods.
continuously in the program periods.
❑
Press
until the fan is at the desired setting (On or Auto).
❑
Press
,
or
and repeat these steps for each program period. The first day is now programmed.
❑
Repeat each step in Program the First Day for the rest of the week.
NOTE:
After the first day is programmed, you can copy that day to any other day using procedure in Copy a Day.
❑
Press
when the entire week is programmed.
Wake
Day
Heat/Cool
Settings
Fan
Leave
Return
Sleep
Run
Program