Lowrance electronic EP-80R TH User Manual
1
Pub. 988-0154-442
EP-80R TH
Electronic Thru-Hull Temp Sensor
Installation and Configuration Instructions
This document shows how to install an EP-80R TH thru-hull temp sen-
sor and how to connect it to a NMEA 2000
®
network. It also provides
instructions on how to configure your temp sensor with Lowrance digi-
tal gauges (LMF-200 & LMF-400) and display units.
NMEA 2000 is the communication bus standard developed by the Na-
NMEA 2000 is the communication bus standard developed by the Na-
tional Marine Electronics Association (NMEA) for use in boats.
Lowrance has introduced a line of products that can communicate over
a NMEA 2000 network (LowranceNet).
All Lowrance NMEA 2000 capable devices are either NMEA 2000 certi-
All Lowrance NMEA 2000 capable devices are either NMEA 2000 certi-
fied or certification is pending.
CAUTION:
CAUTION:
Installing LowranceNET NMEA 2000 devices is significantly
different from installing earlier Lowrance components without
NMEA 2000 features. You should read all of the installation in-
structions before proceeding. Decide where you want to install
all components before drilling any holes in your vessel.
different from installing earlier Lowrance components without
NMEA 2000 features. You should read all of the installation in-
structions before proceeding. Decide where you want to install
all components before drilling any holes in your vessel.
Some sonar or GPS units may require a software upgrade to display
NMEA 2000 data correctly. For free software upgrades or additional
information on the LowranceNet NMEA 2000
®
network system, visit
our web site, www.lowrance.com.
The EP-80R TH temperature sensor.
Red NMEA 2000
connector
connector
Thru-hull
temp sensor
module
temp sensor
module