A&D MS-70 User Manual

MS-70 / MX-50 / MF-50 / ML-50

6. Preparation

Preparation

Preparationssss

6.1.

6.1. Installing the Analyzer

Installing the Analyzer

1. Select the place to install the analyzer.

Refer "3.1.Installing the Analyzer".

2. Level the analyzer by adjusting the leveling feet

and confirm it using the bubble spirit level.

3. Read the power supply voltage label on the back of

the heater cover.

Confirm that voltage, frequency and outlet type

is correct for your local voltage.

Confirm that the rated voltage of the halogen
lamp is correct to your power supply voltage.

Voltage

Label

Power Supply Voltage

The Rated

Voltage of the

Halogen Lamp

100 - 120 V AC 100 V to AC 120 V

AC 120 V

200 - 240 V AC 200V to AC 240 V

AC 240 V

4. Confirm that the power switch is

"OFF" position.

5. Connect the power cord. Ground

the analyzer with the earth
terminal on the power cord.

6. Align the guide hole of the breeze

break ring to the guide on body.

7. Install the pan support.

Align together the

∆

signs on the

pan support and body.

8. Put the sample pan on the pan

handle.

And hook the pan handle on the

notch in the rim of the breeze
break ring.

Leveling foot

Bubble spirit level

Voltage label

Earth terminal

Power cord

Outlet with a
earth terminal

Example

Sign

∆

on pan support

Sign

∆

on body

Guide hole

Sample pan

Pan handle

Pan support

Breeze break ring

Guide on body

Notch in the rim