A&D MS-70 User Manual

MS-70 / MX-50 / MF-50 / ML-50

15.

15. Maintenance

Maintenance

Turn off the power switch and remove power cord during

maintenance.

Cool down all parts of the analyzer before maintenance.

Pan support, sample pan and breeze break ring can be removed.

Clean the analyzer with a lint free cloth that is moistened with

warm water and a mild detergent.

Do not use organic solvents to clean the analyzer.

Dry the parts and reassemble them. Refer to "3. Precautions" and

"6.1. Installing the Analyzer"

Use the original packing material and box for transportation.

15.1.

15.1. Cleaning the Heater Uni

Cleaning the Heater Uni

Cleaning the Heater Unitttt

Clean the glass-housing when it is stained (not clear) to

maintain the drying performance.

The glass-housing can be removed by removing two

screws.

Remove fingerprints from the halogen lamp to keep its life.

Do not touch to reflective surface of the metal reflector.

If the surface is touched, it may be the cause of a drying

temperature error.

Do not touch the temperature sensor that is at the side

of halogen lamp. If the surface is touched, it may be the
cause of a drying temperature error.

Power cord

Outlet

Example

Halogen lamp

Heater unit

Metal reflector

Temperature sensor

Glass-housing

Screw