Fluke 5020A User Manual
Introduction and Specifications
Safety Information
1
1-5
•
The AC adapter can present safety concerns if misused
or damaged. To avoid the risk of electric shock or fire,
do not use the AC adapter outdoors or in a dusty, dirty,
or wet environment. If the cord, case, or plug of the
adapter is damaged in any way, discontinue its use
immediately and have it replaced.
•
Never disassemble the AC adapter. Use only the AC
adapter provided with the instrument or equivalent
adapter recommended by the manufacturer of this
instrument.
•
The AC adapter has circuits with high voltage inside that
could present danger of electrical shock or fire if
exposed. If the AC adapter is damaged in any way or
becomes hot, discontinue its use immediately,
disconnect it from any AC supply, and have it replaced.
Do not attempt to open, repair, or continue using a
damaged or defective AC adapter.
•
The instrument battery can present danger if not handled
properly. To avoid the risk of exposure to dangerous
substances or explosion, immediately remove the
battery and discontinue use if it leaks or becomes
damaged. Never allow the battery to be shorted, heated,
punctured, or dropped. If the instrument is physically
damaged, immediately remove the battery to insure that
it does not become shorted. While removed from the
instrument, store the battery in a location so that it will
not come into contact with metal or fluids that might
short circuit the battery and where it is safe from
excessive temperatures.
•
Used batteries must be disposed of properly. Check your
local regulations for additional information. Never
dispose of batteries in fire which may result in explosion
with the possibility of personal injury or property
damage.
Cautions
•
If the instrument is dropped, struck, or handled in a way
that causes internal or external physical damage,
immediately unplug the AC adapter, remove the battery,
discontinue use, and contact an Authorized Service
Center. Do not attempt to disassemble or repair the
instrument, battery, or AC adapter. Refer repairs or
replacement components to an Authorized Service
Center.
•
The instrument and sensors are sensitive and can be
easily damaged. Always handle these devices with care.
DO NOT allow them to be dropped, struck, stressed, or
overheated.