Emerson 308014EN User Manual
Rosemount Tank Radar REX
Chapter 10 Mechanical Installation
Chapter 10 Mechanical Installation
10-12
Installation Manual
308014EN, Edition 4
May 2013
10.2.6 Mounting the Flange Ball model T38-W
The Flange Ball T38 is welded to the flange.
To mount the T38 do the following:
To mount the T38 do the following:
1
Make sure that the diameter of
the hole is 116 ± 2 mm.
the hole is 116 ± 2 mm.
2
Let the protection plates
remain on the Flange Ball until
the welding is finished. These
plates protect the surface of
the Flange Ball from welding
sparks.
remain on the Flange Ball until
the welding is finished. These
plates protect the surface of
the Flange Ball from welding
sparks.
3
Make sure that the Flange Ball
is mounted in such a way that
the grove is directed upwards
when the flange is mounted on
the tank nozzle.
is mounted in such a way that
the grove is directed upwards
when the flange is mounted on
the tank nozzle.
11.1b_1
16mm.eps
Protection plate
Flange Ball
11.2.eps
Groove
11.3_aa.eps