Fluke 51 Series User Manual
51 & 52 Series II
Using the Thermometer
9
Using the Thermometer
1. Plug the thermocouple(s) into the input connector(s).
2. Press
A
to turn on the thermometer.
After 1 second the thermometer displays the first reading.
If no thermocouple is plugged into the selected input or the
thermocouple is "open," the display shows "- - - -"
If no thermocouple is plugged into the selected input or the
thermocouple is "open," the display shows "- - - -"
Changing Setup Options
Use Setup to change the thermocouple type, offset, sleep
mode, and line frequency settings.
mode, and line frequency settings.
The thermometer stores the settings in its memory. Setup
settings reset only when the batteries are removed for
more than 2 minutes.
settings reset only when the batteries are removed for
more than 2 minutes.
Entering or Exiting Setup
When the thermometer is in Setup mode, the display
shows
shows
s
.
•
Press
D
to start or exit Setup.
Setup Options
Option
Menu
Item
Settings
Thermocouple
Type
Type
TYPE
J, K, T, or E
Offset
O
T1 or T2 (Model 52)
Sleep Mode
SLP
on
(sleep mode on)
or
0FF
(sleep mode
off)
Line Frequency
Li
ne
50 H (50 Hz)
or 60 H (60 Hz)
or 60 H (60 Hz)