Clarion DXZ475MP User Manual

English

DXZ475MP

4. DCP

The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.

We recommend taking the DCP with you when
leaving the car.

Removing the DCP

1. Press the [

SRC

] button for 1 second or

longer to turn off the power.

2. Deeply push in [

OPEN

] button to unlock the

flip down panel.

∗

If the flip down panel does not open fully,
gently open it with your hand.

3. Pull the DCP toward you and remove it.

4. Close the HOLD FLAP.

CAUTION

Be sure to close the HOLD FLAP for safety
when removing the DCP.

Attaching the DCP

1. Insert the right side of the DCP into the main

unit.

2. Insert the left side of the DCP into the main

unit.

Storing the DCP in the DCP Case

Hold the DCP, in the orientation as shown in the
figure below, and put it into the supplied DCP
case. (Ensure the DCP is in the correct
orientation.)

CAUTION

• The DCP can easily be damaged by

shocks. After removing it, be careful not to
drop it or subject it to strong shocks.

• If the FLIP DOWN PANEL is kept open, the

DCP may drop due to vibration of the car.

This results in damage to the DCP. So
close the FLIP DOWN PANEL or remove
the DCP to store into the case.

• The connector connecting the source unit

and the DCP is an extremely important
part. Be careful not to damage it by
pressing on it with fingernails,
screwdrivers, etc.

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

DCP

[

OPEN

] button

DCP

HOLD FLAP

DCP

DCP case

DXZ475MP_EN.book 6 ページ２００６年１１月１０日　金曜日　午後４時５６分