Ericsson RX8000 User Manual
Chapter 5
• Name – This field contains a name string that can be assigned by the user. The
last saved name is displayed on power-up but may be replaced by the user. The
default name is the receiver model name.
default name is the receiver model name.
• Product Name – The name and/or model of the product.
• Current Time – The time taken from the input Transport Stream.
• Uptime – The elapsed time since power-up.
• Front Panel Lockout - Indicates whether the front panel controls are active or
inactive.
Three buttons are provided on this page to allow for Rebooting and resetting of the
equipment:
equipment:
• Reboot Unit – Selecting this button will perform a hardware reset of the
receiver.
• Reset Parameters to Factory Defaults – Selecting this button will set all
parameters to their factory default values (except for the network IP parameters
e.g. IP address and subnet mask) and perform a hardware reset of the receiver.
e.g. IP address and subnet mask) and perform a hardware reset of the receiver.
• Flush all Quality Logs – Selecting this button will flush all the quality logs.
A number of further web pages are accessible from the Device Info page and these
are described in the following paragraphs.
are described in the following paragraphs.
5.2.2.1
Device Info > Build
This page gives details of the build and version information for the equipment.
To view this page, select the Build button from the Device Info Page.
Figure 5.5 Device Info > Build Web Page
There are no fields on this page, which may be edited by the user.
5.2.2.2
Device Info > Environment
This page gives details of the physical environment of the Equipment i.e.
temperature and fan speeds.
temperature and fan speeds.
EN/LZT 790 0005 R1A
5-8