Ericsson RX8000 User Manual

Page of 236
 
Chapter 6
 
6.1.1 
DVB-S2 Input Card (RX8200/HWO/DVBS2) 
This option is only available for the RX8200 Receiver and is fitted as standard to the 
base models of RX8310, 8315 and 8330. 
With accompanying software options, the DVB-S2 Input card supports DVB-S, 
QPSK demodulation and DVB-S2, QPSK and 8PSK demodulation.  
RX8200/HWO/DVBS2 provides four L-band inputs.  
Cautions! 
The receiver provides DC power (refer to Chapter 3, Operating the Equipment 
Locally)
 via the active L-Band input connector to drive an LNB (Low-Noise Block 
Down-Converter). Do not connect equipment other than an LNB to this connector. 
Failure to do this may result in damage to the external equipment. 
The F-type Connector is not suitable for repeated connection and disconnection. 
When intended for use in this way, fit a sacrificial connector and connect to it. 
6.1.2 
8-VSB Input Card (RX83XX/HWO/8VSB) 
This option is only available for the RX8320 ATSC Broadcast Receiver.  
The 8-VSB Input card supports ATSC demodulation.  
6.1.3 
Gigabyte 100/1000Base T Ethernet (RX8XXX/HWO/IP/GIGE) 
This option is available for the RX8320 ATSC Broadcast Receiver and the RX8200, 
8315, 8320 and 8330 DVB Receivers.  
The 100/1000Base T Input card supports an MPEG transport stream over IP and 
SMPT 2022 Pro-MPEG FEC with license key. Two 100/1000 Base T inputs are 
provided and this system also has a very low latency level. 
6.1.4 
G.703 ATM Input Card (RX8XXX/HWO/G703) 
This option is available for the RX8320 ATSC Broadcast Receiver and the RX8315, 
8320 and 8330 DVB Receivers.  
The G.703 ATM input card provides E3 or DS-3 inputs and offers a choice of 34 or 
45 Mbps rates. 
6.1.5 
MPEG-2 4:2:2 SD Decoding Card (RX82XX/HWO/MP2/422) 
This option is only available for the RX8200 DVB Receiver. 
EN/LZT 790 0005 R1A
  
 
 
 
6-5