Brother BAS-311E Owner's Manual
66
BAS-311E.311EL.326E.326EL
Chapter 4. Adjustments
13. Adjusting backlashes
■ Lower shaft
1. Tilt the machine head until it stops.
2. Loosen the set screw
2. Loosen the set screw
q, then turn the rock gear shaft w
to provide 0.05 - 0.12 mm looseness at the tip of the
shuttle driver
shuttle driver
e.
■ Y-axis feed
Loosen the four bolts
q, then adjust the Y-pulse motor
w so that there is no backlash between the rock gear and
the idle gear.
the idle gear.
0.05 - 0.12mm
q
w
q
w
e