Brother BAS-311E Owner's Manual

BAS-311E.311EL.326E.326EL

■ 

DIP switch B

B-1

B-2

B-3

B-4

B-5

B-6

B-7

B-8

When ON

Single split mode activated

----------------

Thread is not trimmed after an emergency stop.

Needle cooler output is produced. (available as an option).

When a rotating-type thread breakage detector device is used, 

detection precision is changed from 8 to 14.

When a fiber-type thread breakage detector device is used, detection precision is changed from 5 to 10.

 

Fiber-type thread breakage detector device is ON, and DIP switch A-8 is ON (available as an option)

When using a 3-stage pedal

Feeding speed is switched to high speed.

SW No.

A-5

A-6

A-7

A-8

When ON

After sewing is completed, work clamp does not automatically rise (only in split mode).

Clamping force output is produced (Inner clamping device available as an option).

Single-pedal operation using the starting switch; when the starting switch is pressed, the work clamp 

lowers, and when it is released, sewing starts.

Thread breakage detector device is activated (available as an option).

SW No.