Husqvarna C10 User Manual

20

1.  Place the thread and spool cap onto the spool pin. 

For smaller spools of thread, place spool cap with the 
small side next to the spool or use the small spool cap.

2.  Snap the thread into the thread guide.

3.  Wind the thread clockwise around the bobbin winder 

tension discs.

4.  Place the thread end through one of the inner holes in 

the bobbin as illustrated and place the empty bobbin 
on the spindle.

5.  Hold on to the thread tail and push the bobbin to the 

right.