Husqvarna C10 User Manual

25

Attention: Turn power switch to the off 
position (“O”).

Raise the needle to its highest position and 
lower the presser foot.

1.  Lower the needle threader lever slowly 

and draw the thread through the thread 
guide as illustrated and then to the right.

2.  The needle threader automatically turns 

to the threading position and the tiny hook 
passes through the needle eye.

3.  Take the thread in front of the needle into 

the hook from the bottom as illustrated.

4.  Hold the thread loosely and release the 

lever slowly. The hook will turn and pull 
the thread through the needle eye forming 
a loop.

 

Pull the rest of the thread through the 
needle eye.