Janome 15000 User Manual

After sewing, depress the thread cutter switch q on the 
right side of the foot control to trim the both needle and 
bobbin threads.
Do not depress the thread cutter switch until the start/stop 
button turns green w.
 q

 Thread cutter switch

NOTE:
• Threads are trimmed when the thread cutter switch

is depressed for more than 0.5 seconds.

• The thread cutter switch does not work without the

foot control being depressed first.

The thread cutter switch position can be adjusted for 
your convenience.
If you wish to attach the thread cutter switch to the left 
side of the foot control, follow the procedure below.

NOTE:
Phillips head screwdriver is not included with this 
machine.

z

  Remove the setscrews A e, B r and washers t 

with a Phillips head screwdriver.

   

 e

  Setscrew A

   

 r

  Setscrew B

   

 t

 Washer

t

r

t

e

e

q

r

e

e

z

x

c

x

  Turn the base plate 180 degrees.

c

  Attach the foot control and thread cutter switch 

with the setscrews and the washers t. Tighten the 
setscrews A e and B r. Be sure that the cable is not 
caught between the foot control and the base plate.

w

5