Janome 15000 User Manual

Stitch balance of the stretch buttonhole (B10)
The stitch balance of the right and left rows of the stretch 
buttonhole may vary depending on sewing conditions. 
If the stitches are not balanced, correct the unevenness 
with the feed balancing dial.
If the right row is denser, turn the dial in the direction 
of “+”.
If the left row is denser, turn the dial in the direction 
of “–”.

NOTE:
Return the feed balancing dial to the neutral position 
and attach the cap when sewing is finished.

The sewing results of the stretch stitch patterns may vary 
depending upon the sewing conditions, such as sewing 
speed, type of the fabric, number of layers etc.
Always test sew on a scrap piece of the fabric that you 
wish to use.
If decorative stitch patterns, letters, numbers or the 
manual buttonhole stitch are deformed, correct them with 
the feed balancing dial.
Remove the cap with your finger.
  q Cap

NOTE:
In normal sewing, set the feed balancing dial to the 
neutral position, i.e. the groove on the dial is centered 
with the standard setting mark.

Decorative stretch stitch patterns
If the pattern is compressed, turn the dial in the direction 
of “+”.
If the pattern is drawn out, turn the dial in the direction of 
“–”.

Letters and numbers
If the pattern is compressed, turn the dial in the direction 
of “+”.
If the pattern is drawn out, turn the dial in the direction of 
“–”.

q

Select the desired language and press the OK key.
The visual touch screen shows messages in the selected 
language.

103