Janome 15000 User Manual

109

x

 Insert the special bobbin holder into the hook race.

    Make sure to match the knob of the bobbin holder 

with the stopper on the machine.

    Attach the needle plate.
       e Knob
       r Stopper
       t  Special bobbin holder for embroidery

NOTE:
Use the standard bobbin holder when sewing lace 
designs and quilting designs that use the same thread 
for the bobbin as the needle thread.

Replace the standard bobbin holder with the special 
bobbin holder for embroidery when using bobbin threads 
other than Janome bobbin thread for embroidery. 

NOTE:
The special bobbin holder is marked with a yellow dot 
for identification.
  q  Yellow dot

w

r

e

z

  Remove the needle plate (refer to the previous page).

    Take out the standard bobbin holder.
       w  Standard bobbin holder

z

x

t

q

You can wind a bobbin while running the machine.
To set the additional spool pin, please refer to page 12.
Draw the thread to the left and forward around the thread 
guide e.
Draw the thread to the rear and to the right around and 
under the guide plate r.
Firmly pull the thread to the right.
Follow the procedure from c to , of page 13 to wind the 
bobbin.
       q  Spool stand
       w Spool
       e  Thread guide
       r  Guide plate

q

w

e

r