Janome 15000 User Manual

113

z

  Turn the power switch on and open the carriage arm.

    Press the mode switch key and a warning message 

will appear.

    Press the OK key and the carriage will move to the 

starting position.

    The visual touch screen will display the embroidery 

mode window.

       q  Mode switch key

w

e

r

NOTE:
If you press the mode switch key with the carriage
arm retracted, a confirmation message will appear.
Do not press the OK key or X key. Instead, open the
carriage arm.

x

  Place the hoop on the machine and attach the hoop to 

the carriage by inserting the lock pin of the hoop into 
the hole in the carriage.

    Turn the knob clockwise to secure the hoop. 
       w  Lock pin
       e Hole

To avoid sewing over a tail of the needle thread, place 
the thread end on the thread holder.
  r  Thread holder

Pass the needle thread through the hole in the 
embroidery foot and draw it up to the thread holder.
Hang the thread on the thread holder from front to back.

q

z

x