Janome 15000 User Manual
162
Troubleshooting (automatic needle threader)
If the automatic needle threader stuck and will not return
to the up position automatically, correct it as follows:
to the up position automatically, correct it as follows:
Carefully turn the handwheel away from you or toward
you to move the needle up a little.
you to move the needle up a little.
The automatic needle
threader will return to the up position automatically.
If the automatic needle threader still does not return to
the up position, follow the procedure below.
If the automatic needle threader still does not return to
the up position, follow the procedure below.
z
Turn the power switch off.
Open the face plate.
x
Lift the shaft plate with your finger as far as it goes.
z
x
c
c
Close the face plate.
Turn the power switch on.