Janome 15000 User Manual

m

  Fold over the length of the garment fabric, sew back 

and forth beside the original seam to secure flaps of 
the patch.

       r Wrong side of garment fabric
       t Sew back and forth

r

m

t

q

,

r

w

e

.

r

t

y

⁄0

t

⁄1

y

t

⁄2

y

y

⁄3

,

 Fold over the end of fabric and sew back and forth 

three times over the triangular end.

       q Wrong side of patch
       w Right side of garment fabric
       r Wrong side of garment fabric

.

 The patch should be cut 1 to 1.5 cm (7/16˝ – 5/8˝) 

away from the hole. The corners should be cut 
rounded off as shown.

       e Right side of patch
       r Wrong side of garment fabric

⁄0

 Place the facing on the wrong side of the garment 

fabric. Mark the 4 corners with pins as shown.

       t Facing
       y Garment fabric

⁄1

 Turn all the layers over and cut the buttonhole opening 

on the facing in the same way as step x.

    Four marker pins show you the corner points on the 

facing. Fold back each flap between the facing and 
patch.

       t Facing
       y Garment fabric

⁄2

 Stitch around the opening with a needle and thread as 

shown.

       t Facing
       y Garment fabric

⁄3

 The welted buttonhole is complete.

       y Garment fabric

52