Janome 15000 User Manual

There are 6 types of applique stitches available in this 
section.
You can select the needle stop position either up or down 
by pressing the needle stop position key.
  q  Needle stop position key
The letter above the stitch image denotes the baseline of 
the needle drop position.
M: Middle (center)
R: Right
The baseline can be adjusted without changing the stitch 
width by pressing the “+” or “–” key on the bottom row.

R

M

Pivoting at applique corners
When sewing an applique with sharp corners, you may 
turn on the “Foot up for pivoting” option so that the 
presser foot automatically goes up when the machine 
stops.
Press the foot-up key to turn on this option
  w  Foot-up key

NOTE:
Make sure to stop the machine with the needle 
dropped at the outer edge of the applique.

Starting over from the corner
Press the startover key before sewing in the new 
direction to sew from the beginning of the pattern.
  e  Startover key
Two options of startover are available for applique 
stitches. Press the cornering key to select normal 
startover or cornering startover.
The key icon will change to show which option is being 
selected when pressing the key.
  r  Cornering key

Normal startover: 
Sew a locking stitch then start sewing from the beginning 
of the pattern.

Cornering startover: 
Start sewing from the beginning of the pattern without a 
locking stitch.

q

r

e

w

87