Janome 15000 User Manual

q

 

You can adjust the contrast of the visual touch screen by 
pressing the “+” or “–” key.

w

 

The signal sound can be adjusted by pressing the “+” or “–” 
key. 
Set the value to “OFF” by pressing the “–” key several 
times to mute the signal sounds.

e

 

You can set your machine’s dimensional unit to either 
inches or millimeters by pressing the “inch” or “mm” icon 
key.
The default unit is millimeters.

r

 

If you need to run the machine without threads, turn off 
the upper thread sensor.

Press the next page key to show the next menu.

t

 

The sewing lights can be turned on or off individually, 
however the retractable sewing light will always turn on 
when extended.
Press the corresponding light keys to turn on or off the 
sewing lights.

y

 

The sewing lights will turn off and the machine will enter 
standby mode if you do not use the machine within the 
time period set by this timer. Doing any operation will turn 
the lights and screen on again.
The standby timer can be set from 1 to 30 minutes.
If you wish to turn off the timer, press and hold the “+” key  
until “OFF” shows in the timer window.

u

 

Press the ON/OFF key to turn on the screen saver, and 
the visual touch screen will show the screen saver when 
the machine is in standby status. 

Press the import key to import an original screen saver 
from a USB flash drive. 
You can create an original screen saver with Screen 
Saver Tool included in the Horizon Link Suite CD-ROM.
The imported original screen saver data will be deleted if 
the internal memory is formatted (refer to page 96).
  i   Import key

Press the next page key to show the next menu.

q

w

e

r

t

y

u

i

93