Panasonic Acr14CF.tmp User Manual
12
Programmable Settings
Programmable Functions
You can use the following functions to customize your unit. See the
corresponding pages for function details.
corresponding pages for function details.
Make sure the handset and base unit are not being used. The handset
must be operated near the base unit and while off the base unit.
must be operated near the base unit and while off the base unit.
• If an alarm tone sounds during programming, walk closer to the base unit
and start again from the beginning.
• You can exit programming mode at any time by pressing [OFF].
• If you do not press any buttons for 60 seconds, the handset will exit
• If you do not press any buttons for 60 seconds, the handset will exit
programming mode.
Lift the handset, then press [VOICE ENHANCER].
• The indicator flashes.
• “
• “
” is displayed on the base unit.
To set the time and day, press [0]. (See page 13.)
To set the remote code, press [1]. (See page 18.)
To select the number of rings, press [2]. (See page 18.)
To select the dialing mode, press [8]. (See page 14.)
• The display shows numbers or characters related to adjustments or
settings.
Press [VOICE ENHANCER].
• A confirmation tone will be heard and the setting will be saved.
• The indicator light goes out.
• The indicator light goes out.
Handset
[VOICE ENHANCER]
and Indicator
and Indicator
[OFF]