Panasonic Acr14CF.tmp User Manual

An alarm tone sounds 
when you press [C],
[SP-PHONE] or [VOICE
ENHANCER].

• You are too far from the base unit. Walk 

closer to the base unit and try again.

• Confirm the AC adaptor is plugged in.
• Raise the base unit antenna.
• If the above remedies do not solve the 

problem, the handset may have lost 
communication with the base unit. 
Register the handset again (p. 23)

Static, sound cuts in/out, 
fades. Interference from 
other electrical units.

• Move the handset and the base unit 

away from other electrical appliances 
(p. 3).

• Walk closer to the base unit.
• Raise the base unit antenna.

The handset does not ring.

• The ringer volume is turned off. Set to 

high, medium, or low (p. 14).

You cannot program any 
functions.

• Programming is not possible while the 

handset is being used.

• Do not pause for over 60 seconds while 

programming.

• Walk closer to the base unit.
• While another user is listening to 

messages or the Answering System is 
handling a call, you cannot program. Try 
again later.

While programming, the 
handset starts to ring and 
the program stops.

• A call is coming in. To answer the call,  

press [C] or [SP-PHONE]. Start again 
from the beginning after hanging up.

You cannot redial.

• If the last number dialed was more than 

48 digits long, the number will not be 
redialed correctly.

You cannot make long 
distance calls.

• Please make sure you have long 

distance service.

You cannot page the 
handset.

• The handset is too far from the base unit 

or is engaged in an outside call. Try 
again later.