Mr. Handsfree Blue Bird User Manual
English
3
The Blue Bird Headset must be turned off before initiating pairing.
Press and hold the S1 button (3)
for 5 seconds until the blue (4) and red (5) indicators of the Headset are flashing alternatively.
The
Headset is now ready for pairing. (If you are wearing the Headset during the pairing process, you will hear
two short high tones when the Headset is ready for pairing.)
two short high tones when the Headset is ready for pairing.)
Initiate the pairing process on your Bluetooth
®
mobile phone to pair with the Blue Bird Headset. (Refer to the manual of your mobile phone.)
You will
be asked to enter the PIN-code to complete pairing, enter 1234 and confirm it.
When the pairing has been
successful, the red indicator (5) of the Headset will turn off and the blue indicator (4) will flash slowly.
Note:
1.
1.
If the Blue Bird Headset is not in pairing mode, your mobile phone won’t find the Headset. Please set the
Headset into pairing mode before letting your mobile phone search for the Headset.
Headset into pairing mode before letting your mobile phone search for the Headset.
2.
If no pairing is possible for a period of time (approx. two minutes), the Headset will automatically turn off,
and the previous pairing (if any) is revoked. You may need to start all over again.
and the previous pairing (if any) is revoked. You may need to start all over again.
3.
Paired devices remain paired even when:
•
•
One of the devices is not turned on.
•
A service connection is interrupted or the service stopped.
•
One or both devices are rebooted.
MAKING AND ANSWERING / ENDING CALLS
Once the Blue Bird Headset is successfully paired with your mobile phone, you can use it to make and
receive calls. The Blue Bird Headset can be used with voice dialing if your mobile phone supports this
feature.
receive calls. The Blue Bird Headset can be used with voice dialing if your mobile phone supports this
feature.
MAKING CALLS
Using voice dialing:
Using voice dialing:
Press the S1 button (3), wait for a beep and say the name of the person you want to call.
Press the S1
button (3) again to cancel voice dialing.
Using the phone keys to make a call:
Enter and dial the number on the mobile phone as you normally do.
Once the call has been set up, the
sound will be transmitted to your Headset automatically.
Redial:
Press and hold the S2 button (2) for 3 seconds to redial the last number you called.
ANSWERING / ENDING CALLS
When the Blue Bird Headset is turned on and there is an incoming call, you will hear a musical tone and
the blue indicator (4) will change to a quick-flashing mode.
the blue indicator (4) will change to a quick-flashing mode.
Press the S1 button (3) to answer the call or
press and hold the S1 button (3) for 3 seconds to reject the call.
Adjust the Headset volume by pressing
the S1 button (3) to increase the volume and pressing the S2 button (2) to decrease the volume.
End the
call by pressing and holding the S2 button (2) for 3 seconds.
When the Headset is turned off, press and hold the S1 button (3) for 3 seconds to turn the Headset on.
Then press the S1 button (3) again to answer the call.
m_BlueBird_GB.pmd
05.12.2005, 13:36
3