Sennheiser HME 110 User Manual
Using the HME 110
HME 110
| 11
Adjusting the microphone gain “Mic Gain”
According to JTSO approval C58a, the microphone output
voltage is factory preset to 400 mV. If the microphone output
voltage is too high or too low for your audio system, it can be
readjusted on the microphone.
voltage is factory preset to 400 mV. If the microphone output
voltage is too high or too low for your audio system, it can be
readjusted on the microphone.
왘
Use a small slotted screwdriver and turn the “Mic Gain
Adjustment” screw (see diagram) until you have reached
the desired setting.
Adjustment” screw (see diagram) until you have reached
the desired setting.
BKE
45–1
MADE IN GERMANY
P/N 045–305–097
TSO - C58a
Mic Gain Adjustment
+
–
HME110_547018_0112_SP3.book Seite 11 Freitag, 13. Januar 2012 5:20 17