Sennheiser HME 110 User Manual
If a problem occurs ...
16 |
HME 110
If a problem occurs ...
Problem
Communication
s in one ear only
s in one ear only
You are using a stereo
audio system but the
headset is set to mono
operation.
audio system but the
headset is set to mono
operation.
Set the mono/stereo
switch to “
switch to “
STEREO
”
(see page 9).
You are receiving a
mono source but the
headset is set to stereo
operation.
mono source but the
headset is set to stereo
operation.
Set the mono/stereo
switch to “
switch to “
MONO
”
(see page 9).
Very low
volume
communication
volume
communication
The volume is set too
low.
low.
Adjust the volume
setting of your
headset
setting of your
headset
(see page 10).
The headphone
connection has been
pulled out.
connection has been
pulled out.
Check to see if the
headphone jack plug
is correctly connected.
headphone jack plug
is correctly connected.
Reduced
intelligibility
intelligibility
The microphone
connection has been
pulled out.
connection has been
pulled out.
Check to see if the
microphone jack plug
is correctly connected.
microphone jack plug
is correctly connected.
Microphone
output voltage
too high or too
low
output voltage
too high or too
low
The microphone gain
“Mic Gain” needs to be
readjusted.
“Mic Gain” needs to be
readjusted.
Adjust the
microphone gain
microphone gain
“Mic Gain” until you
have reached the
desired setting
have reached the
desired setting
(see page 11).
Possible cause
Solution
HME110_547018_0112_SP3.book Seite 16 Freitag, 13. Januar 2012 5:20 17
Communication
s in one ear only
s in one ear only