Pioneer VSX-324-K-P User Manual

En

The following section shows you how to make detailed 

settings to specify how you’re using the receiver, and also 

explains how to fine-tune individual speaker system settings 

to your liking.

• The OSD will not appear if you have connected using the 

HDMI output to your TV. Use composite connections for 

Home Menu.

• If headphones are connected to the receiver, disconnect 

them.

• You can’t use the Home Menu when the iPod/USB 

input is selected.

Press  RECEIVER to switch on.
2

The Home menu appears on your TV. Use 

/// and 

 on the remote control to navigate through the screens 

and select menu items. Press RETURN to exit the current 

menu.

• Press HOME MENU at any time to exit the Home menu.

• Manual SP Setup

-

 – Specify the size and number of 

speakers you’ve connected (see below).

-

 – Specify which frequencies will be sent to the 

subwoofer (page 28).

-

 – Adjust the overall balance of your 

speaker system (page 28).

-

 – Specify the distance of your 

speakers from the listening position (page 29).

• Input Assign – Specify what you’ve connected to the 

 audio input (see The Input Assign menu on 

page 29).

• Auto Power Down – Sets to automatically turn off the 

power when the receiver has not operated for several 

hours (see The Auto Power Down menu on page 29).

• HDMI Setup – Set the audio return channel function and 

set the HDMI input signal to Standby Through output or 

not during standby (see The HDMI Setup menu on 

page 30).

This receiver allows you to make detailed settings to optimize 

the surround sound performance. You only need to make 

these settings once (unless you change the placement of 

your current speaker system or add new speakers).

Use this setting to specify your speaker configuration (size, 

number of speakers).

 

Use 

/ to select the size (and number) of each of the 

following speakers:

• Front –Select LARGE if your front speakers reproduce 

bass frequencies effectively, or if you didn’t connect a 

subwoofer. Select SMALL to send the bass frequencies to 

the subwoofer.

• Center – Select LARGE if your center speaker reproduces 

bass frequencies effectively, or select SMALL to send 

bass frequencies to the other speakers or subwoofer. If 

you didn’t connect a center speaker, choose NO (the 

center channel is sent to the other speakers).

• Surr – Select LARGE if your surround speakers reproduce 

bass frequencies effectively. Select SMALL to send bass 

frequencies to the other speakers or subwoofer. If you 

didn’t connect surround speakers choose NO (the sound 

of the surround channels is sent to the other speakers).

VSX-324-K-P_CMXESM.book  27 ページ  ２０１３年２月１３日　水曜日　午前９時１７分