Shure E5C Leaflet

Page of 2
E5c
Sound Isolating Earphones
The E5c combines Dual Live 
Performance Drivers with an Inline 
Crossover to create the same reference-
quality audio developed for 
professional musicians. 
The result of dedicated 
speakers for highs 
and lows is the faithful 
reproduction of precision 
highs, natural mids, and 
full-bodied bass. 
INSERTING THE EARPHONES
If the earphone seems to be lacking in low frequency response (bass), check 
the tightness of the seal between the earphone and your ear, or try one of the 
other sleeve options. 
Warning: Do not push the earphone sleeve beyond the ear canal opening.
WEARING THE EARPHONES
Two popular methods for wearing the earphones are illustrated below.
CHOOSING AN EARPHONE SLEEVE
Your earphones come with a selection of sleeves. Make sure the sleeve you 
use is easy to insert into your ear, fits comfortably, and is easy to remove from 
your ear.
CLEANING THE EARPHONE NOZZLE
If the nozzle of your earphone is blocked, clean the nozzle using the supplied 
wax removal loop. 
FULL TWO YEAR WARRANTY
Shure Incorporated (“Shure”) hereby warrants that this product will be free 
from defects in materials and workmanship for a period of two years from 
the date of purchase. At its option Shure will repair or replace the defective 
product and promptly return it to you, or refund the purchase price. You should 
retain proof of purchase to validate the purchase date and return it with any 
warranty claim.
If you believe this product is defective within the warranty period, carefully 
repack the unit, insure it, and return it postage prepaid to:
Shure Incorporated 
5800 W. Touhy Ave. 
Niles, IL 60714-4608
SHURE Incorporated  http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000  U.S. Fax: 847-600-1212  Int’l Fax: 847-600-6446
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140  Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290  Fax: 852-2893-4055
Make sure that the sleeve completely 
covers the earphone nozzle.
 If any part 
of the nozzle is exposed, the sleeve is 
not properly installed.
Foam Sleeves
When using the foam sleeves, compress the sleeve between 
your fingers before inserting it into the ear canal. Hold the 
earphone in place for about ten seconds while the foam 
expands and creates a tight seal.
Soft Flex Sleeves
In small, medium, and large sizes. Made from pliable rubber.
Triple-Flange Sleeves
If desired, the sleeve nozzle may be shortened. Use sharp 
scissors to carefully trim the nozzle to the desired length.
Nozzle
Wax Removal Loop
Tighten the cable and take up slack by raising the cable sleeve .
When cleaning, do not force any object through the earphone nozzle! This will 
damage the earphone sound filter.
If necessary, the supplied replacement nozzles may be used. See the back of 
this guide for instructions on nozzle replacement.
©2005, Shure Incorporated
27EN3202A (Rev. 2)
Printed in U.S.A.
Flex Sleeves
In small, medium, and large sizes. Made from translucent 
PVC. 
Over the ear
in back
Over the ear
in front
left ear
right ear