Tekkeon ET2000 User Manual

USER GUIDE  

1. When you hear two beeps while connected on a call, press and hold the Volume

-

button until

you hear a short beep followed by a long tone (approximately 3 seconds). 

The original call will be

placed on hold and the new call be will be connected. Your phone will display the incoming and
connected calls.

2. While connected on a call, press and hold the Volume

-

button to toggle between the two

connected calls.

3. When connected to a call, press TALK to end the call. 

You will be reconnected to the other call.

NOTE: For some mobile phones, you must configure the phone to answer calls directly on your
Bluetooth headset. Refer to the mobile phone user guide for instructions for initiating this feature.

1. When you have finished your call, press the headset TALK button. 

The call will be disconnected.

You can transfer calls from your mobile phone to your headset, and from your headset to your
mobile phone.

1. With the call connected to your mobile phone, press the TALK button on your headset. 

The call

will be connected to your headset.

1. With the call connected to your headset, press and hold the Volume

+

button until you hear a

beep (approximately 3 seconds). 

The call will be connected to your mobile phone.

UG_et2000_v1.2_r1  10/21/05  11:05 AM  Page 9